RATTMMOTOR CNC Spindle Motor Kit 220V, 2.2KW Air Cooled Spindle Motor ER20+2.2KW 220V Inverter VFD 3HP+80mm Spindle Motor Clamp Mount+14pcs ER20 Collet for CNC Router Engraver Milling Machine
by RATTMMOTOR
- 【Spindle Motor Parameters】The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed. It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged. This spindle is also equipped with 80mm spindle motor mount and 14pcs/set ER20 collets., 【Spindle Motor Features】This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan, which is of high quality. In addition, it contains 4 bearings, high-precision grinding taper hole, high-precision, low noise., 【VFD Inverter Parameters】The 2.2KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Control Model: SPWN. Input Voltage: 220V(+/-15%) ,Output Voltage 208VAC-240VAC, Input Frequency: 48-63 Hz, Output Frequency: 0-400 Hz, Input Phase: 1 or 3 phase, Output Phase: 3 phase., 【VFD Inverter Functions】The variable frequency drive inverter has Multi-Protection functions: Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection, over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect., 【Wide Applications】The air-cooled spindle motor kit is mainly used for engraving non-metal materials, such as wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS), ect. Also can engrave onsoft metal surface working, including gold,silver,copper, aluminium,Pb etc.
